Time Difference Setting (Local Time) - JRC NCR-333 Instruction Manual
Navtex receiver
Hide thumbs
Also See for NCR-333:
- Brochure (2 pages) ,
- Instruction manual (136 pages) ,
- Operation card (2 pages)
Table of Contents
Advertisement
6.3.3.4 Time Difference setting (LOCAL TIME)
"LOCAL TIME" can set up time difference to UTC.
When "ON" is selected, "(LT)" is displayed in the POSITION/TIME screen. The time of the POSITION/TIME
screen displays the numerical value which added time difference to UTC.
When "OFF" is selected, "(UTC)" is displayed.
4.LOCAL TIME
(TIME DIFFERENCE): +09:00
Procudure
1.
Select
4.LOCAL
TIME, and press the ENT key. Cursor moves to the right side of ":".
2.
Press the ▲ ▼ key and select the "ON" or "OFF", and then press the ENT key.
The cursor moves to the lower line.
3.
Press the ▲ ▼ key and select "+ (add) " or "- (sub)". Next, input the numerical value within the range of
00:00 to 12:00. ( -12:00 to +12:00)
To save the "LOCAL TIME" settings, cursor should press the ENT key on the rightmost position
(minute).
Notes
The setup time difference is displayed on the POSITION/TIME screen.
6-36
:
ON
Hide quick links:
Advertisement
Table of Contents
