External Printer Settings (Printer Property) - JRC NCR-333 Instruction Manual
Navtex receiver
Hide thumbs
Also See for NCR-333:
- Brochure (2 pages) ,
- Instruction manual (136 pages) ,
- Operation card (2 pages)
Table of Contents
Advertisement
6.3.4.5 External printer settings (PRINTER PROPERTY)
Serial port (RS-232C: MAINTENANCE/PRINTER) conditions can be set up when connecting external printer.
Select
5.PRINTER
PROPERTY, and press the ENT key. Cursor moves to the right side of ":".
After setting up to "FLOW CONTROL", press the ENT key. All settings are saved.
5.PRINTER PROPERTY
- DATA OUT
- DATA FORMAT
- BAUDRATE
- FLOW CONTROL
- PRINT DIRECTION
The explanations of each item are as follows;
(1) DATA OUT
The data output method for printer is set up.
Press the ▲ ▼ key and select the following items. If the ENT key is pressed, Cursor moves to the lower line.
OFF:
The message is not outputted to the external printer.
AUTO:
After receiving a message, the data is automatically outputted to the external printer.
MANUAL:
The data of the selected message is outputted to the external printer.
(2) DATA FORMAT
The output data format is set up.
Press the ▲ ▼ key and select the following items. If the ENT key is pressed, Cursor moves to the lower line.
ON:
The header and footer are added to a message text.
OFF:
Only a message text is printed.
(The example of printing）
---- 518kHz NAVTEX MESSAGE
ZCZC IA01
TEST MESSAGE
NNNN
--- END OF MESSAGE CER = 0.0% ---
(3) BAUDRATE
Baudrate (bits/sec) is set up.
Press the ▲ ▼ key and select the following items. If the ENT key is pressed, Cursor moves to the lower line.
Baudrate can be selected from "4800", "9600", and "38.4K." BPS.
(4) FLOW CONTROL
The flow control is set up.
Press the ▲ ▼ key and select the following items. If the ENT key is pressed, Cursor moves to the lower line.
NONE:
The flow control is not performed.
HARD:
The flow control is performed.
(5) PRINT DIRECTION
Print direction is set up.
Press the ▲ ▼ key and select the following items. If the ENT key is pressed, all settings are saved.
UPRIGHT:
Upright printing
INVERT:
Inverted printing (Set up when NKG-91 is connected.)
The initial settings are as follows. Set up as follows when DPU-414 is connected.
If NKG-91 is connected, please change PRINT DIRECTION into INVERT.
DATA OUT:
DATA FORMAT:
BAUD RATE:
FLOW CONTROL:
PRINT DIRECTION:
6-42
(Set up when DPU-414 is connected.)
MANUAL
ON
4800BPS
NONE
UPRIGHT
: MANUAL
: ON
: 4800BPS
: NONE
: UPRIGHT
Header
----
Footer
Hide quick links:
Advertisement
Table of Contents
