Rx Station Screen - JRC NCR-333 Instruction Manual

6.3.1 RX STATION screen

To display RX STATION menu screen, select
Procedures
1. Press the ▲ ▼ key to select the menu item.
2. When ENT key or
- When cursor is on the item 1 and 2, cursor moves to the right side of ":"
- When cursor is on the item 3 and 4, the menu screen of item 3 and 4 appears.
Notes
- To return to the MAIN MENU screen, press the CLR key or
- If the key is pressed when cursor is on the right side of ":" of item 1 and 2, cursor returns on the
item 1 and 2. (1.RX
The outlines of Menus are as follows;
1. RX MODE:
2. OPERATING FREQ.:
3. AUTO MODE SETTING:
4. MANUAL MODE SETTING: Displays the menu screen for selecting the receiving station regardless of
6-26
RX STATION
1.RX MDOE:
2.OPERATING FREQ.:RX1/RX2/RX3
3.AUTO MODE SETTING
4.MANUAL MODE SETTING
Fig.6-6 RX STATION menu screen
key is pressed, the menu screen of selected item is displayed.
MODE, 2.OPERATING
Select "AUTO" or "MANUAL" as the receiving station selection mothod.
Select receiving channels.
Displays the menu screen by automatically selecting the receiving station
in each NAVAREA (Navigation area).
NAVAREA.
1. RX STATION.
AUTO
FREQ.)
ⅤⅢ
key.
(See 6.3.1.1)
(See 6.3.1.2)
(See 6.3.1.3)
(See 6.3.1.4)