JRC NCR-333 Instruction Manual page 76

c. Save (or Clear) settings
Save (or clear) the settings on the sub screen after setting up.
Procedures
1) Press the * key. The sub screen appears.
Cursor is on the [ALL
2) Press the ▼ key and select the following items.
3) Save settings
Select the [OK], and press the ENT key.
Clear all settings
Select the [ALL CLEAR], and press the ENT key.
All the settings are restored to its former state.
Continue setting up
Select the [CANCEL], and press the ENT key.
This sub screen is closed.
4) To start save process, select [OK].
Then, "SAVE OK" is displayed on the sub screen.
Press the ENT or CLR key.
NAVTEX menu screen appears.
6-44
CLEAR].
INS OUTPUT SETTING
STATION SELECT ALL
518k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
490k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: ABCDEFGHIJKLMNOPQRSTUVWXYZ
*INS MSG SET*
MSG TYPE SELECT ALL
SAVE CHANGES TO
518k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
THIS SETTING?
490k: ABCDEFGHIJKLMNOPQRSTUVWXYZ
4.2M: ABCDEFGHIJKLMNOPQRSTUVWXYZ
[ALL CLEAR]
[OK]
*INS MSG SET*
SAVE CHANGES TO
THIS SETTING?
[ALL CLEAR]
[OK]
*INS MSG SET*
NOW SAVING...
[OK]
*INS MSG SET*
SAVE OK
[OK]
ⅩⅠ
[CANCEL]
[CANCEL]
ENT
[CANCEL]
Saving is completed
[CANCEL]