Table of Contents
Advertisement
*
Use only DOT
3 brake fluid from a
sealed container.
* Handle bruke
fluid with cdre becouse it
can damoge paint and plastics as used
for instrument lenses and fa ings.
* Nerer allow contdminantt
ldirt, water,
etc.) to enter the bruke fluid reservor.
Rear Brake Fluid Level:
Remove the reservoir cap, washer and
diaphragm. Whenever the level is lower
than the lower level mark (4) on the rcar
reservoir, fill
the reservoir with
DOT 3
BRAKE
FLUID
from a sealed container,
up to the upper level mark (3). Reinstall
the diaphragm and washer, and tighten
the reservof cap securcly..
CAUTION :
* Use only DOT 3 bruke
fluid
sedled container.
* Handle bruke
fluid with care
can damage point and electic
* Neref qllow contaminants (dirt,
etc,) to enter the brcke fluid.
7 8
(REAR)
(3) Upper Ievel mark
(4) Lowei level mark
Advertisement
Table of Contents
