Table of Contents
Advertisement
FINAL DRIVE OIL
Change the oil when specified by the
maintenance schedule.
NOTE:
* Change the oil with the final
ddve
warm and the motorcycle on its center
stand to assure complete and rapid
draining.
I To drain the oil remove the oil filler
cap (l) and drain plug (2).
2, After the oil is completely drained
check that the sealing washer (3) on
the drait plug is in good condition and
install the drain plug.
Drain Plug Torque:
1.0 1.4 ks-m (7-10 fttb)
3- Fill the final drive with apploximately
150cc (5,1 oz) of the recommended
oil.
Make sure the recommended oil is filled
up to the lower edge of th€ inspection
hole (4).
4. Install the oil filler cap.
74
(1) Oil filler cap
(2) Oil drain pluC
(3) Sealing washer
(4) Inspection hole
Advertisement
Table of Contents
