Table of Contents
Advertisement
NO T E:
'
Tighten the nuts and bolts securely.
Axle nut:
8.0- 10.0 ke-m (58-72 ft-lb)
Shock absorber bolt and nut:
3.0-4.0 kg-m (22-29 tt-tb)
Axle holding bolt:
2.4-2.9 ke-m (17 -21 ft-lb)
Final drive case nuts:
3.5-4.5 kg-m (25-33 ft-tb)
CAUTION :
* llhen installing the )alheel,
fit
the
brake disc between the brake padt
carcfully.
After installing the wheel, apply the
brake several times and then check that the
wheel rotates freely, u'hen released. Re-
check the wheel if the bmke drags or if the
wheel does not rotatc freely.
CAUTIOT:
* Always replace used cotter pins with
new one[.
60
l7[rr!Et!tt
* If a toque wrench rras not
installation, see your dealet as
posrible to verify proper assembly
Advertisement
Table of Contents
