Table of Contents
Advertisement
gauge. If the gauge inseds easily, tighten
the nuts on the right axle holder to 3-4
ke-m (22-29
ft-lbs) starting with the
forward nut.
6. Il the feeler gauge cannot be inserted
easily, move the fork leg outward until
the gauge can be inserted and tighten
the holder nuts (4) with the gauge
inserted. After tightening, lemove the
gauge.
7. Check that the other three corners of
the caliper holder (6) have a clearance
of at least 0.7mm (0 028 in ) between
caliper holder and disc.
.8. After installing the wheel, apply the
brakes several times and check
for
free wheel rotation when released.
IEM
* Failure
to pro|ide
adequate disc to
caliper holder cleara ce may darnage the
brake discs and impair bruking efficien-
cy.
* If a torque wrench wqs not used for
installation, see your duthofized Honds
dealer as soon as possible to eerify
proper assembly,
(8) Feeler gauge
57
Advertisement
Table of Contents
