Conversion To Natural Gas - Napoleon LINEAR PATIOFLAME GPFL48 User Manual

12

Conversion to Natural Gas

WARNING!
cool. Ensure burner is turned off. Turn gas off at source and disconnect the patio flame before beginning
conversion.
WARNING!
WARNING!
leak tested before operating the patio flame.
Your patio flame can be easily converted to natural gas by following these steps:
1. Remove glass embers from the tray.
2. Remove the glass tray from the patio flame by removing the (18) screws that hold the tray in place.
3. Carefully lift the glass tray from the patio flame and set aside. Take care not to damage or kink the
thermocouple wire.
4. Disconnect the stainless steel flex connector from the orifice using (2) wrenches.
5. Unscrew the propane orifice from the inside of the burner as illustrated.
6. Replace the propane orifice with the natural gas orifice supplied.
Note: The air shutter has been factory set and does not need to be adjusted.
www.napoleongrills.com
To avoid the possibility of burns conversions should only be done when the patio flame is
Glass embers may have sharp edges wear safety glasses and gloves when handling.
This conversion must be performed by a licensed gas fitter, and all connections must be