Rodgers W-5000 User Manual page 13

3 EFFECTS
Section
4 UPPER Tone
Select
5 Music Rest
6 LOWER Tone
Select
7 BASS Tone
Select
8 Floppy Disk
Drive
9 Performance
Controls
10 BALANCE
Section
11 ROTARY
Buttons
12 UPPER
Drawbars
13 PERC/USER
Drawbars
14 LOWER
Drawbars
15 BASS Drawbars
16 General Presets
17 Upper Manual
18 Lower Manual
19 LCD/System
Controls
20 Speaker
Enclosure
21 Expression
Pedal
22 Pedalboard
These buttons access a variety of the W-5000's effects, such as reverb, chorus, drawbar
click, aftertouch and so on.
These buttons select Tones and functions for the Upper manual.
Music rest and panel light intensity can be changed as required.
These buttons select Tones and functions for the Lower manual.
These buttons are used to select Tones for the Pedalboard and for the Lower manual when it
is split into two sections (Keybass).
The drive can be used to record and playback your keyboard performances, as well as to
store instrument data and playback commercial song data.
The [SPKR] knob controls the overall volume of the W-5000 (including headphones when
they're connected). The [LINE] knob controls the level of the Line Out signal. The
[Bender/Modulation] lever raises and lowers the pitch, and adds vibrato to the notes you
play.
These sliders are used to create the appropriate balance between Tones which you have
layered together. There are separate sliders for the UPPER, LOWER and BASS sections.
The [ROTARY] button activates the W-5000's rotary speaker simulator, and the
[FAST/SLOW] button changes the rotary effect speed.
Drawbars act like tone controls for sounds produced by the Tone-Wheel/Drawbar generator.
They can provide real-time control as you play the Upper manual.
The PERC (Percussion) drawbars control the attack portion of the sound (for the Upper
manual only). The USER drawbars can be assigned a variety of different functions as
required.
These drawbars affect the Tone-Wheel sounds for the Lower manual.
These drawbars affect the Lower manual and Pedalboard.
These buttons are used to select and store overall instrument settings.
This is a 61 note, velocity sensitive, lightly weighted keyboard.
This is a 76 note, velocity and aftertouch sensitive, lightly weighted keyboard.
The LCD (Liquid Crystal Display) provides information about selected Tones and
operational status. The system controls (EDIT and FUNCTIONS) allow you to custom
configure and control your instrument.
This box contains the W-5000's speakers.
This pedal functions as a kind of volume control, but different functions can be assigned to
it. The 'kick' switches offer additional control.
This is a 25 note, velocity sensitive pedalboard.
Introduction & Installation
13