Rodgers W-5000 User Manual page 103

Ì
Set (or verify) the following parameters on the W-5000:
MIDI Mst In Port
MIDI Mst In Chn
MIDI Mst In Filt
MIDI Mst In Filt
MIDI Mst In Filt
MIDI Mst In Exp
MIDI Mst Out Port
MIDI Mst Out Chn
MIDI Mst Out Filt
MIDI Mst Out Filt
MIDI Mst Out Filt
MIDI Mst Out Exp
MIDI Start Stat Send
MIDI Local Cntl Upper
MIDI Local Cntl Lower
MIDI Local Cntl Pedal
You can use the BASS [MIDI] button to control sound coming from the PR-300S. Just be sure that its
Port is set to '1' and its Chn is '1-10'.
Í
Record the first pass by pressing [RECORD] on the PR-300S and playing your bass lines on the W-
5000. You can select General Presets or other bass sounds during the pass, but remember that they
will not be recorded. Only notes played on the pedals or keyboard bass (and controller movements)
will be recorded. Also, if you play on the other two keyboards, you will hear no sound because their
local control parameters are turned off. If the General Presets selected during recording contain
different controller assignments, you may not hear controller movements although they are being
recorded. Press [STOP] on the PR-300S when recording is complete.
Î
Select a sound for the Lower manual. Make sure that all the controllers you want assigned to the
Lower manual are so assigned (you can use a General Preset to do this).
Ï Change the following parameters on the W-5000:
MIDI Local Cntl Lower
MIDI Local Cntl Pedal
MIDI Mst Out Filt
MIDI Mst Out Filt
You can use the LOWER [MIDI] button to control sound coming from the PR-300S. Just be sure that
its Port is set to '1' and its Chn is '1-10'.
Ð
Record the second pass by pressing [RECORD] on the PR-300S and playing your Lower manual
parts. You can select General Presets or other Lower manual sounds during the pass, but remember
that they will not be recorded. Only notes and controllers assigned to the Lower manual will be
recorded. Also, if you play on the pedals or the Upper manual, you will hear no sound because their
local control parameters are turned off. If the General Presets selected during recording contain
different controller assignments, you may not hear controller movements although they are being
recorded. Press [STOP] on the PR-300S when recording is complete.
Ñ
Select an appropriate Upper manual sound on the W-5000. Be sure that all the controllers you want
assigned to the Upper manual are so assigned (you can use a General Preset to do this).
2
U:13 L:12 P:14
U:None
L:None
P:None
CC#: 7
2
U:13 L:12 P:14
U:All
L:All
P:PC
CC#: 7
CC
Off
Off
On
On
Off
L:PC
P:All
Using MIDI
103