CipherLab 8000 Series Reference Manual page 57

Hide thumbs Also See for 8000 Series:

Table of Contents

Bluetooth Menu > Pairing Test

The pairing procedure is for the creation and exchange of a link key between two

Bluetooth-enabled devices. The devices use the link key for future authentication when

exchanging information.

Bluetooth Menu > 5. Pairing Test

1. The mobile computer will first start with making an inquiry so that the system can generate a

list of device(s) that has been discovered nearby.

2. Secondly, select a desired target device.

3. Then, select a Bluetooth service from the "Target Machine" menu. To stop and exit the test,

press [ESC].

Serial Port (SPP)

Access Point (PAN)

DialUp Network (DUN)

4. After pairing successfully, the target device will be added to the Frequent Device List for

quick connection in the future.

Note: During the initial setting of Bluetooth wireless network, the pairing procedure must

be carried out before the Echo tests.

Chapter 4 Configuration

Table of Contents

Need help?

Do you have a question about the 8000 Series and is the answer not in the manual?

8020 8021 8061 8071 8001