CipherLab 8000 Series Reference Manual page 52

44 8000 Series Reference Manual
Bluetooth Menu > Connect Setting
A basic Bluetooth system can be configured as (1) point to point - DUN mode, and (2) point
to multi-point - SPP or PAN mode. Set the following parameters if necessary.
Bluetooth Menu > 2. Connect Set
1. Local Name
2. Remote Name
3. Broadcast Me
4. Power Saving
5. BT-GPRS AP
Name
Enter a name for identifying the mobile computer.
By default, it is made up of model No. and the serial number.
Enter a name for making a specific connection.
The remote name must be one of those in the Freq. Dev. List. Otherwise,
the mobile computer will fail to make a connection with any device
without pairing.
DO NOT specify any remote name when roaming across different
groups of APs is required.
Options - Enable or Disable
For initial connection, broadcasting must be enabled so that other
Bluetooth devices can discover the mobile computer.
For security concerns, you may disable it in future use to hide the mobile
computer from other Bluetooth devices.
This refers to the low power consumption mode.
Options - Enable or Disable (Only the Sniff mode is supported.)
For DUN-GPRS mode, enter the AP name for connecting to the content
server.