Brother 884-T09 Operation Manual page 32

4
Move the cursor to the first character to be incremented in
the numbering sequence and press the OK or Enter key.
5
Move the cursor to the last character to be incremented in
the numbering sequence and press the OK or Enter key.
The number of labels to be printed is displayed.
6
Select the number of labels to be printed using the
key, or type the number using the number key.
Hold down the
number of copies.
7
Press the OK or Enter key.
The labels are printed.
As each label is printed the number of copies printed is shown.
• Press the Esc key to return to the previous step.
• The figures shown on the screen during printing indicate the "count / number of
copies".
• Pressing the Space key when selecting the number of copies resets the value to 01,
the default.
• Auto-numbering can also be applied to bar codes. When a bar code contains an auto-
numbering sequence, no other fields in the label can contain an auto-numbering
sequence.
• The auto-number portion of the label is incremented after each label is printed.
• Only one auto-numbering sequence can be used in a label.
• Any symbols or other non-alphanumeric characters in the auto-numbering sequence
are ignored.
• An auto-numbering sequence can only contain a maximum of five characters.
• Letters and numbers increase as shown below:
01...90...
AB...ZA...
ab...za...
A0A1...A9B0...
Spaces (shown as underscores "_" in the example below) can be used to adjust the spacing
between characters or to control the number of digits that are printed.
_910...9900...
_ZAA...ZZAA...
1_92_0...9_90_0...
or key to quickly adjust the
or
Printing a Label
1
2
3
4
5
6
7
8
31