Using The File Memory; Storing A Label Into Memory; Opening A Stored Label File - Brother 884-T09 Operation Manual

USING THE FILE MEMORY

You can store up to 50 of your most frequently used labels in the file memory. Each label is
stored as a file, allowing you to quickly and easily recall your label when needed again.
When the file memory is full, each time you save a file you will need to overwrite one
of your stored files.
1
After entering the text and formatting the label, press the File key and select "Save"
using the
2
Press the OK or Enter key. A file number is displayed.
If a label is already stored to the file number, the label text will also be displayed.
3
Select a file number using the
save the label to the selected file number.
The file is saved and the screen returns to the text entry screen.
If a file is already stored to the selected number, the data will be overwritten by
the file you try to save.
• Press the Esc key to return to the previous step.
• Up to 280 characters can be saved in one file. However, the number of characters that
can be saved may differ, for example when entering symbols.
• To store a label created by using the Templates or the Block Layouts, refer to "Using
Templates" on page 18 or "Using Block Layouts" on page 22.
1
Press the File key and select "Open" using the
2
Press the OK or Enter key. The file number of a stored label is displayed.
The label text is also displayed to identify the label.
3
Select a file number using the
open the selected file. The file is opened and displayed on the text entry screen.
Press the Esc key to return to the previous step.
38

Storing a Label into Memory

Storing a Label into Memory
or key.

Opening a Stored Label File

or key, and then press the OK or Enter key to
or
or key, and then press the OK or Enter key to
key.