Setting Character Attributes By Each Line - Brother 884-T09 Operation Manual

EDITING A LABEL
• Press the Esc key to return to the previous step.
• Press the Space key to set the selected attribute to the default value.
• Refer to the Setting Options table for all the available settings.
• Small characters may be difficult to read when certain styles are applied (e.g.
Shadow + Italic).

Setting Character Attributes by Each Line

When a label consists of two or more lines of text, you can set different values of
character attributes (font, size, width, style, line and alignment) for each line.
Move the cursor to the line you wish to change the
character attribute by using the
press the Shift key and then press the Font key to
display the attributes. (
you are now applying the attribute for that specific line
only.)
When different attribute values are set for each line, the
value will be displayed as ***** when you press the Font
key. When you change the setting on this screen by using
the or
lines of the label.
10
Setting Character Attributes
,
on the screen indicates that
key, the same change will be applied to all
, or key. Next,