Table of Contents
Advertisement
Deleting all text at once
Use the Clear key to delete all text at once.
1
Press the Clear key.
The Clear options are displayed.
2
Using the
or
format settings, or select "Text&Format" to delete all text and format settings.
Press the Esc key to return to the text entry screen, without erasing (or clearing)
text or format.
3
Press the OK or Enter key.
All text is deleted. All format settings are also deleted if
"Text&Format" was selected.
In addition to the symbols available on the keyboard, there are various symbols (including
international and extended ASCII characters) available with the symbol function.
To enter a symbol, use the Symbol function (see below).
Alternatively, press the Shift key and then press a key on the keyboard to enter the symbol
printed on the selected key's upper-right corner.
Entering Symbols Using the Symbol Function
1
Press the Symbol key.
A list of symbol categories and symbols in that category is displayed.
The last symbol entered is selected in the displayed list.
2
Select a symbol category (Punctuation, Mathematics, etc.) using the
then press the OK or Enter key.
3
Select a symbol using the
The selected symbol is inserted into the line of text.
When selecting a symbol:
• Press the Shift key and Symbol key to return to the previous page.
• Press the Symbol key to go to the next page.
key, select "Text Only" to delete all text while retaining the current
Entering Symbols
,
,
or
key and then press the OK or Enter key.
1
2
3
4
or
key and
5
6
7
8
5
Entering Symbols
Advertisement
Table of Contents
