[Name Change]; [Password]; [Password Change]; [Network Control] - Panasonic PT-VZ575N Operating Instruction

[NAME CHANGE]

You can change the projector name, for example, when using the DHCP server.
1) Press as to select [NAME CHANGE].
2) Press the <ENTER> button.
f The [NAME CHANGE] screen is displayed.
3) Select characters with the asqw buttons and press the <ENTER> button to enter the projector
name.
f Select [ALL DELETE] to delete all the entered characters, or press the <DEFAULT> button on the remote control to
delete a character on the cursor in the entry field.
4) Select [OK] with the as buttons and press the <ENTER> button.
f To cancel the change of the name, select [CANCEL] and press the <ENTER> button.
Note
f [Name □□□□] (□□□□ is 4-digit number) is set before the projector leaves the factory.

[PASSWORD]

By controlling connection with password setting, it is possible to prevent an external device from accidentally connecting and
interrupting projection images, etc.
1) Press as to select [PASSWORD].
2) Press qw to switch the item.
f The items will switch each time you press the button.

[OFF]

[ON]
Note
f Set to [ON] to perform password check when connecting with the projector using "Wireless Manager ME6.2".
(Default: [OFF])
f When using the deliver image to all function or the delivered image deletion function of the "Multi Projector Monitoring &
Control Software", image cannot be delivered to the projector with password setting set to [ON]. To use these image delivery
functions, set it to [OFF].

[PASSWORD CHANGE]

1) Press as to select [PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
3) Press asqw to set the password.
4) Press as to select [OK], and press the <ENTER> button.
Note
f You can enter 8 characters at most.
f Change the password periodically that is hard to guess.

[NETWORK CONTROL]

Set when you want to control the projector from a computer connected to the network.
1) Press as to select [NETWORK CONTROL].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]

[AMX D. D.]

Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through "AMX Device Discovery". For details, refer to the website of AMX
Corporation.
URL http://www.amx.com/
94 - ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
Disables the entry of network password.
Enables the entry of network password.
This function is disabled.
This function is enabled. WEB control, PJLink control, the command control of the LAN are
enabled.