Setting Up; Installation Mode; Parts For Ceiling Mount (Optional) - Panasonic PT-VZ575N Operating Instruction

Setting up

Installation mode

There are four ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 79)
depending on the installation mode.
Mounting on the ceiling and projecting forward
Menu item
[PROJECTION METHOD]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]

Parts for ceiling mount (optional)

This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the ceiling mount
bracket for high ceilings or low ceilings.
Model No.:
① ET-PKL100H (for high ceilings), ET-PKV400B (Projector Mount Bracket)
② ET-PKL100S (for low ceilings), ET-PKV400B (Projector Mount Bracket)
f Use only the ceiling mount brackets specified for this projector.
f Refer to the Installation Instructions for the ceiling mount bracket when you install the bracket and the projector.
Attention
f To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your dealer or a
qualified technician.
Chapter 2 Getting Started - Setting up
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Method
[FRONT/CEILING]
Setting on a desk/floor and projecting forward
Method
[REAR/CEILING]
Menu item
[PROJECTION METHOD]
Menu item
[PROJECTION METHOD]
Method
[REAR/DESK]
Method
[FRONT/DESK]
ENGLISH - 31