Connecting Terminals - Panasonic PT-VZ575N Operating Instruction

r Connecting terminals
1 <COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YC
signals. Or output the RGB signals or YC
signals to an external device.
2 <COMPUTER 1 IN> terminal
This is the terminal to input RGB signals, Y/C signals or
YC C /YP P signals.
B R B R
3 <HDMI 1 IN> terminal
This is the terminal to input HDMI1 signals.
4 <HDMI 2 IN> terminal
This is the terminal to input HDMI2 signals.
5 <USB B (DISPLAY)> terminal
This terminal is used to connect the projector to the
computer with a USB cable when you want to use the
USB display function of the application software "Wireless
Manager ME6.2".
For details, please refer to the "Operating Instructions-
Wireless Manager ME6.2" in CD-ROM.
6 <USB A (VIEWER)> terminal
This terminal is to insert the USB memory directly.
( Æ page 119)
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Chapter 1 Preparation - About your projector
C /YP P
B R B R
C /YP P
B R B R
7 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network.
This is also used when connecting a device for
transmitting video and audio signals via the LAN terminal.
8 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally
control the projector by connecting a computer.
9 <VIDEO IN> terminal
This is the terminal to input video signals.
10 <AUDIO IN 3 (L/R)> terminal
This is the terminal to input audio signals.
Left input <L> and right input <R> are provided for the
<AUDIO IN 3> terminal.
11 <AUDIO IN 1> terminal
This is the terminal to input audio signals.
12 <AUDIO IN 2 (MIC IN)> terminal
This is the terminal to input audio signals. Or connect the
MIC to this terminal.
13 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal to the
projector.
ENGLISH - 27