Table of Contents
Advertisement
mjpeg_maxbitrate
h264_ maxframerate
h264_maxbitrate
streamcodec
7.25 WebAPI: Information for a mode
Group: capability_videoin_c<n>_mode<m>, n = channel index from 0 to "capability_nvideoin"-1, m
= mode index from 0 to "capability_videoin_c<n>_nmode"-1
PARAMETER
effectivepixel
outputsize
<Positive
40000000
Integer>, -
A list of
30,
<Positive
30,
Integer> and
30,
"-"
30,
30,
30,
30
<Positive
40000000
Integer>
<Positive
6,6,6
Integer>
VALUE
DEFAULT
<WxH>
1920x1080
<WxH>
1920x1080
URL commands for FD8167
URL Command Document for All Series
0/99
Maximum bitrates of MJPEG.
The unit is bps.
"-" means MJPEG does not support
bit rate control.
0/99
Maximum fps that the device can
encoded with H.264 on resolutions
in current video mode.
"-" means not support.
0/99
Maximum bitrates of H.264.
The unit is bps.
0/99
Represent supported codec types of
each stream.
This contains a list of positive
integers, split by comma. Each one
stands for a stream, and the
definition is as following:
Bit 0: Support MPEG4.
Bit 1: Support MJPEG
Bit 2: Support H.264
SECURITY
DESCRIPTION
(get/set)
0/99
The visible area of full scene in this
video mode.
The unit is pixel in source.
0/99
The output size of source, equal to
the captured size by device, in this
video mode. The unit is pixel.
This value is used as a basic
coordinate system for many features,
like ePTZ, privacy mask, motion,
etc.
53
VIVOTEK
User's Manual - 187
Advertisement
Table of Contents
