Vivotek FD8167-T User Manual page 122

Fixed dome network camera, 2mp, 30m ir, ip66, smart ir, smart stream, 3dnr, p-iris
Hide thumbs Also See for FD8167-T:
Table of Contents

Advertisement

VIVOTEK
NOTE:
► How does motion detection work?
A
B
There are two motion detection parameters: Sensitivity and Percentage. In the illustration above,
frame A and frame B are two sequential images� Pixel differences between the two frames are
detected and highlighted in gray (frame C) and will be compared with the sensitivity setting� Sensitivity
is a value that expresses the sensitivity to moving objects� Higher sensitivity settings are expected to
detect slight movements while smaller sensitivity settings will neglect them� When the sensitivity is set
to 70%, the Network Camera defines the pixels in the purple areas as "alerted pixels" (frame D).
Percentage is a value that expresses the proportion of "alerted pixels" to all pixels in the motion
detection window. In this case, 50% of pixels are identified as "alerted pixels". When the percentage is
set to 30%, the motions are judged to exceed the defined threshold; therefore, the motion window will
be outlined in red�
For applications that require a high level of security management, it is suggested to use higher
sensitivity settings and smaller percentage values�
122 - User's Manual
C
D

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fd8367-vFd8167Fd8367-tv

Table of Contents