Table of Contents
Advertisement
VIVOTEK
Patrol settings
You can select some preset positions for the Network Camera to patrol�
Please follow the steps below to set up a patrol schedule:
1� Select the preset locations on the list, and click
�
2� The selected preset locations will be displayed on the Patrol locations list�
3� Set the Dwelling time for the preset location during an auto patrol�
4� If you want to delete a preset location from the Patrol locations list, select it and click Remove�
5� Select a location and click
to rearrange the patrol order�
6� Select patrol locations you want to save in the list and click Save to enable the patrol settings�
7� To implement the patrol schedule, please go to homepage and click on the Patrol button� Please refer
to the next page�
x1.8
2
3
1
4
5
6
User's Manual - 103
Advertisement
Table of Contents
