Remote Control - Epson EB-585W User Manual

Part Names and Functions

Remote Control

Name
A
[Power] button Turns the projector power on or off.
[t]
s "Getting Ready to Project"
B
Each time you press the button, the input changes between
[Computer] button
images from the Computer1 port and the Computer2
port.
C
Each time the button is pressed, the image cycles through
[Video] button
the S-Video, Video, HDMI1/MHL, and HDMI2 ports.
• Enter the Password.
D
Numeric buttons
s "Setting Password Protection"
• Use this button to enter numbers in Network settings
from the Configuration menu.
E
If pressed while projecting analog RGB signals from
[Auto] button
Computer1 port or Computer2 port, you can
automatically optimize Tracking, Sync., and Position.
F
[Aspect] button Each time the button is pressed, the aspect mode changes.
s "Changing the Aspect Ratio of the Projected Image"
p.59
G
[Num] button Hold down this button and press the numeric buttons to
enter passwords and numbers.
s "Setting Password Protection"
H
[Menu] button Displays and closes the Configuration menu.
s "Using the Configuration Menu"
17
Function
p.44
p.101
p.101
p.116