List of Functions
Sub-menu
Source
You can display the source name for the connected
equipment currently being projected.
You can display the content of Input Signal set in the
Input Signal
Signal menu according to the source.
You can display the resolution.
Resolution
Video Signal
You can display the settings for Video Signal in the Signal
menu.
You can display the refresh rate
Refresh Rate
You can display the image signal Information.
Sync Info
It may be needed if service is required.
This information is about errors that have occurred with
Status
the projector.
It may be needed if service is required.
Displays the projector's firmware version information.
Version
Displays the projector's serial number.
Serial Number
Event ID
Displays the application error log.
s "About Event ID"
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Function
g
.
p.159
Reset Menu
Sub-menu
You can reset all items in the Configuration menu to their default
Reset All
settings.
The following items are not reset to their defaults: Input Signal,
Zoom, User's Logo, all items in the Network menu, Lamp
Hours, Language, Password, and Image Shift.
Clears the cumulative lamp hours use time. Reset this when you
Reset Lamp
replace the lamp.
Hours
137
Function