Removing The Side Rails - Electrolux EOA5551AOX User Manual

20 www.electrolux.com
• To clean metal surfaces use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories after each
use and let them dry. Use a soft cloth
with warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can destroy nonstick coating.
Stainless steel or aluminium
appliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials, as they can
cause damage to the oven sur-
face. Clean the oven control panel
with the same precautions.
10.1 Cleaning the door gasket
• Regularly do a check of the door gas-
ket. The door gasket is around the

Removing the side rails

2
1
frame of the oven cavity. Do not use the
appliance if the door gasket is dam-
aged. Contact the Service Centre.
• To clean the door gasket, refer to the
general information about cleaning.
10.2 Removable shelf supports
and catalytic panels
To clean the oven, remove the shelf sup-
ports and catalytic panels.
WARNING!
Be careful when you remove the
shelf supports. The catalytic pan-
els are not attached to the oven
walls and can fall out when you
remove the shelf supports.
WARNING!
Before maintenance, make sure
that the appliance is cool. There is
a risk of burns.
1.
Pull the front of the shelf support rail
away from the side wall.
Hold the rear shelf runners and cata-
lytic panel in place with the other
hand.
2.
Pull the rear shelf support rail away
from the side wall and remove it.