Rearview Monitor System; Mirrors - Power Electric - Winnebago Vista User Manual

SECTION 3 -
DRIVING YOUR MOTORHOME
• Reverse step to store passenger workstation.

REARVIEW MONITOR SYSTEM

–If Equipped
Your coach may be equipped with a Rearview
Monitor System, which lets you see what is
directly behind your vehicle for maneuvering
assistance and safety.
A microphone built into the rear camera lets
you hear warning sounds or verbal directions
from an assistant.
Rearview Monitor
(Located on dash)
NOTE: A Rearview Monitor System remote
control is provided in your InfoCase.
Sideview Cameras
–If Equipped
The Sideview Cameras allow you to see what
is beside you before turning or changing lanes.
The Sideview Cameras activate with the
corresponding turn signals and replace the rear
camera view on the monitor until the turn is
completed or the signal lever is canceled
manually.
Further Information
See the Rearview Monitor manufacturer's
user guide provided in your InfoCase for
complete features, operating instructions, and
safety precautions.
3-6
MIRRORS – POWER ELECTRIC
–If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is located on the driver side
armrest panel or the dash. The ignition key must
be on to adjust the mirrors.
Move Selector Switch L or R to select mirror.
Center "neutral" position disables arrows
to avoid unintentionally moving a mirror.
Press Arrow Buttons to move
mirror surface in direction indicated.
Mirror Heaters
The mirrors may also contain heating
elements to de-fog or de-ice the mirror glass
during cold weather operation. A switch for the
mirror heaters is located on the dash. To turn on,
press the switch UP. Press DOWN to turn off.