Entrance Door Prop Rod - Winnebago Vista User Manual

Manual Dome
Crank Knob
Power Roof Ventilator
To Operate Ceiling Ventilator
1. Turn the Dome Crank Knob to raise the dome
about 3" or more to allow the turbine fan to
operate. (A built-in safety switch will not let
the fan motor run unless the dome is partially
open).
2. The turbine fan will start automatically as the
vent dome is raised and stop as the vent dome
is lowered and closed. (Fan Power switch
must be ON and Fan Speed knob in a position
other than 0-Off).
3. Turn the Fan Speed knob to the desired level
(0-Off, 1-Low, 2-Med, 3-Hi).
4. Open a window or door to provide airflow.
Direction of airflow is determined by which
window or door is opened.
NOTE: For best results, close all other roof
vents, windows, and doors, then open
one (1) window the farthest distance
from the roof ventilator.The fan speed
selector on the fan allows you to adjust
the amount of circulation you need at any
time.
5. If you want the vent dome raised without the
fan running, turn Off either the Fan Power
switch or Fan Speed knob (0-Off ).
Fuse
Fan Speed
Selector
Further Information
See the power ventilator manufacturer's
operating instructions supplied in your InfoCase
for further instructions, care, and cleaning
information.

ENTRANCE DOOR PROP ROD

–If Equipped
(Typical view – your coach may differ in
appearance depending on model.)
The main entrance door may feature a rod
designed to prop the entrance door open when the
patio awning arm is attached to the sidewall and
the awning is extended. Hook one end of the rod
into the loop on door and other end into the loop
on the sidewall.
Prop Rod Storage Location
(Located on inside of screen door)
-Typical View
• Hook one end of rod into loop on door and
other end into loop on sidewall.
-Typical View
SECTION 12 -
MISCELLANEOUS
12-9