Table of Contents
Advertisement
S elect one of the three modes in the indoor unit operation
('Switch to Fan Mode, ' 'Set Heating Temperature to 16, ' and 'Power OFF')
T he 'Circulation Period' can be set between 3 minutes and 10 minutes.
T he 'Total Number of Groups' can be set between 2 groups to 8 groups.
S et the groups for each indoor unit.
(Set the group to '0' to exclude the indoor unit from circulation control.)
Click on the 'Save' button to complete the setup.
Peak Power Monitoring
Function Explanation
The DMS users can inquire current progress of peak power
control on the Web.
Monitoring current progress
T he Current Peak Level is displayed.
T he Current Demand information is displayed.
T he Current Peak execution status is displayed.
Reference (Explanation of Terms)
- Target Demand: Target Demand power.
- Current Target Demand: Target Demand of current moment
- Current Demand: Demand power of current moment.
MIM-Doo_IB_E_25059.indd
23
Value is set in the Demand controller.
Average consumption power during Demand
time limit.
23
E-
2006-03-21
ｿﾀﾈﾄ 7:34:53
Advertisement
Table of Contents
