Table of Contents
Advertisement
1
DMS Network Information
Change the set information by inquiring the existing set
network information from the DMS network information and
clicking the Edit button. If this information is changed,
the DMS is restarted automatically.
2
Master DMS Information
Master/Slave is a setting for sharing of time and peak power
control information when several DMS are connected to the
one system. With assigning basic DMS to the Master and
remains to the Slaves, users can share Data among DMS.
When delivering, all DMS are basically set to the Master.
3
System Time
Change the system time by inquiring the current system time
and clicking the Edit button.
(The time is set when the DMS is installed and it is recommended
not to be modified if possible. The schedule function and the
power distribution function may be affected by changing the
time.)
4
Change Password
For the safety, passwords exchange between the DMS and the
upper controller (SNET Series) At this time, users can change
passwords of devices that are connected to the DMS.
5
Priority
If a DMS is connected with several upper controllers,
users set to allow a setting to only one unit having the higher
priority or to allow a setting to all controllers by setting a
priority between each upper controller. When delivering, it is
set to 'Do not use priority. '
6
Language selection
Can set using languages. (Default: English)
MIM-Doo_IB_E_25059.indd
29
29
E-
2006-03-21
ｿﾀﾈﾄ 7:34:55
Advertisement
Table of Contents
