Using the DMS through the Web (Continued)
20
E-
MIM-Doo_IB_E_25059.indd
20
Setting and Viewing Peak Power Control
Function Details
The DMS users can set and view the peak power control information.
Refer to pg. 5~7 for more information on peak power control.
Using Peak Power Control
1
Select the "No Control" mode to disable the peak power
control.
2
Select the "Priority Control" to run the peak power control in
priority control mode.
3
Select the "Circulation Control" to run the peak power control
in circulation control mode.
4
The indoor unit control page is displayed if the 'Edit' button
is pressed after selecting either the 'Priority Control' or the
'Circulation Control. ' (The 'Edit' button changes to the 'Save'
button when the 'Edit' button is pressed.)
Setting the Priority Control
S elect the 'Priority Control' as shown in the screen above.
C lick on the 'Edit' button to set the priorities of each indoor unit
as shown in the screen below.
2006-03-21
ソタネト 7:34:53