Installing The Speaker And Control Head; Figure 5-3. Motorcycle Control Head Cabling (3075217A01) - Motorola ASTRO APX O2 User Manual

Motorcycle Radio Installation Installing the Speaker and Control Head
5.4

Installing the Speaker and Control Head

NOTE: To disable the internal speaker of the O2 Control Head, please refer to
Speaker Disassembly" on page
The control head mounting location and configuration is determined largely by the make and model
of motorcycle. Two different mounting configurations are described below. One involves mounting
the speaker and control head together as a unit using the combination speaker/control-head bracket
(shown in Figure
using a smaller control-head bracket supplied by Motorola. In this case, the speaker is mounted
elsewhere. This section outlines installation procedures for each configuration mentioned above.
The customer (or installer) is in the best position to determine the most appropriate mounting
configuration for the control head and speaker based on the particular motorcycle on which the
equipment is to be mounted.
!
When determining its location, position the control head so that it is clearly visible and
within easy reach of the motorcycle operator.
C a u t i o n
6878215A01
5-4) supplied by Motorola. Alternately, the control head may be mounted by itself

Figure 5-3. Motorcycle Control Head Cabling (3075217A01)

2-44.
5-7
Section 2.5.1: "Internal