2.2.2.3 Multiple Control Head Installation; Figure 2-31. O9 Control Head Rear View - Motorola ASTRO APX O2 User Manual

Standard Configurations Radio Mounting

2.2.2.3 Multiple Control Head Installation

Control heads in a multiple control head configuration should be installed per the steps detailed in
Section 2.2.2.2: "Remote Mount Control Head Installation" on page
connected to each of the two CAN connectors on the transceiver, with the remaining heads
connected to one or both of the first two. Control heads can also be connected a "daisy chain"
configuration from a single transceiver CAN connector. See
NOTE: The transceiver must be configured for Multiple Control Head via CPS programming.
Navigate to the "Control Head" tab in the Radio Wide section of CPS, and select "Help" for
further information and tutorials.
J300R
Control Head 1
6878215A01

Figure 2-31. O9 Control Head Rear View

J300R
J300L
Control Head 3
FUSE
J300L
J200
J300R
Control Head 2
2-24. Two heads can be
Figure 2-32
FUSE
J200
J300R J200
Control Head 4
FUSE
J200
for examples.
FUSE
RED LEAD
) + (
) ( -
BATTERY
2-27