Ubee DVW326 User Manual page 37

Ubee Interactive
DHCP Server
Starting Local Address
Number of CPEs
Lease Time
Apply
Ubee DVW326 Advanced Wireless Voice Gateway Subscriber User Guide • March 2014
Label
Enables (Yes) or disables (No) DHCP on the device. If No is
selected, all the static DHCP rules in this screen are ignored.
Defines the starting local IP address for the pool of IP
addresses that can be used by connecting clients. Private
addresses are translated to public IPs to be used on the
network.
Defines the maximum number of customer premises
equipment devices (CPE) that can connect to the network
through the DVW326.
Defines the DHCP lease time duration in minutes between 1
and 71582788. A DHCP user's PC gets an IP address with a
lease time. When the lease time expires, the PC must connect
to the DHCP server and be issued a new unused IP address.
Note: The default DHCP lease time is 3600 seconds and
should be changed to 86400 seconds (24 hours). This helps
resolve connectivity issues with some iMAC and Windows 7
devices that turn off the network interface when they go into
standby mode. This results in slow Web browsing until the
device gets a new IP address via DHCP.
Saves changes.
Using the DHCP Option
Description
33