¿
[REC] mode:
Taking pictures that match the scene being
recorded
(
: Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [
Press 2/1 to select the scene mode.
•
You can also use the front dial to select.
Press [MENU/SET] to set.
•
The menu screen is switched to the recording screen in the
selected scene mode.
∫ About the information
•
If you press [DISPLAY] when selecting a scene mode in step
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
•
To change the scene mode, press [MENU/SET], and return to above step
while selecting the scene mode menu [
•
The scene mode flash setting is reset to the initial setting when the scene mode is changed and
then used.
•
When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
•
The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
–
[SENSITIVITY]/Items other than [STANDARD] and [STANDARD] (
[METERING MODE]/[FLASH SYNCHRO]/[I.EXPOSURE]/[DIGITAL ZOOM]/[ISO LIMIT SET]
Select this when you want to take pictures of sunset view. This allows you to take vivid
pictures of the red colour of the sun.
].
2
] by pressing 3/4/2/1.
ï [SUNSET]
Advanced (Recording pictures)
,
2
by pressing 1,
) in film mode/
VQT1U44
93