Gb.1 Introduction; Gb.2 Product Description; Gb.3 Usage In Accordance With The; Specifications - Tennant 3860 - 3880 Instructions For Use Manual

Industrial vacuum cleaner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
GB
GB.1
Introduction
Your new industrial vacuum cleaner has been
designed for daily professional use. If you
comply with the safety instructions which are
listed in the following, and adhere to the care
and maintenance instructions, you will maintain
the safety and the value of your vacuum
cleaner for a long period of time. The
prerequisite of this is that you carefully read the
details of these instructions before starting to
work with the industrial vacuum cleaner. Store
these instructions, and ensure that all operating
personnel read these instructions thoroughly.
If, contrary to expectations, technical defects
occur in your cleaner, please contact your
specialist sorma centre.
GB.2
Product description
In order to vacuum diverse materials, either
wet or dry, sorma has employed state-of-the-
art technology in the Aspra vacuum cleaner
series. Both dry and wet materials can be
vacuumed without having to change the filter. A
choice of one or two powerful suction motors,
four tanks, and two chassis, either coated or in
stainless steel, is available. You may decide in
favour of a machine with a mechanical float or
choose between six different electronic control
systems.
Motor section
With one or two 1000 W suction
motors with asbestos-free collectors.
All plastics have been selected in order
to achieve a high level of resistance to
chemicals and oils.
The 15 m long mains power lead
guarantees a wide effective radius, and is
simple to replace.
For the first time, the plastic parts
around the turbine are thermally protected.
The entire electrical and electronic
section is housed in a dust-protected
cassette.
6 cassettes with various shut-off
systems are available.
The folded filter (usage categories up
to "C" available) prevents dust from
escaping into the open air, and ensures that
the motor remains "as new".
For those who prefer the float shut-off,
or who wish to vacuum up non-conductive
fluids (oil), machines with a mechanical float
are available.
Tank and chassis
40/50 litre tank in polypropylene,
stainless steel and nickel chromium steel
with cock or hose coupling.
30 litre stainless steel tank.
12
Home
coated steel tube, and one stainless steel
chassis.
simple drainage.
Accessories
hand-held tubes, floor nozzle and a wide
range of other nozzles for all applications.
vacuuming large, open areas in an optimal
manner (see Figure 4).
necessitate a greater degree of effort if
these are to be vacuumed up without
problems:
1. Fine dusts,
2. Adhesive dusts (both block unprotected
3. Dusts which endanger health (these
Intermediate ring
This is necessary for vacuuming large
quantities of dry materials
Functional description (see Figure 3):
Function 1
When vacuuming using the paper filter bag, the
intermediate ring (4) is positioned.
The entire volume of the tank is now available
for the paper filter (24).
Function 2
When vacuuming with the pre-filter, "the filter
disc" (33), the intermediate ring (4) with filter
depressor (23) is required.
Vacuuming can be carried out with the paper
filter or directly into the tank. The filter disc
provides the solution when vacuuming
adhesive dusts, even without a paper filter
insert. The folded filter is protected, service life
is increased, and time-consuming filter
cleaning is avoided.
Function 3
When vacuuming into a poIy waste bag, a
special tank (30) is required. The poIy waste
bag (32) is inserted into the special tank. The
filter disc (33) is clamped over the edge of the
tank. The intermediate ring (29) is positioned.
The connection hose (7) must be connected
between the tank adapter and the tank.
GB.3
The Aspra series wet and dry vacuum cleaners
are suitable for vacuuming non-flammable
dusts and non-flammable liquids.
In addition to usage for domestic purposes,
they are also suitable for industrial use, e.g. in
Find... Go To..
User instructions
One chassis manufactured from
Tilting chassis in order to enable
32, 38 mm and 50 mm suction hoses,
60 cm wide, right suction nozzle for
Intermediate ring: Three types of dust
folded filters) and
must be collected and disposed of).
Usage in accordance with the

specifications

Advertisement

Table of Contents
loading

This manual is also suitable for:

38603880

Table of Contents