Milk Pipework; Rinse Milk Pipework; Clean Milk Pipework - Miele CVA 5060 Operating And Installation Instructions

Milk pipework

Rinse milk pipework

To prevent milk going off in the
machine and the pipework getting
clogged up, it should be rinsed through
after use. Rinsing is not a substitute for
cleaning the pipework through at the
end of the day.
Maintenance
H I
q r
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Rinse milk pipework" and
touch the OK sensor.
^ Select "Start" and touch the OK
sensor.
Follow the instructions in the display.
To rinse the pipework in the lid for
the stainless steel milk flask, fill the
larger of the two plastic containers
to the "max." mark with cold water.
Fit the lid from the milk flask to the
container, making sure that it
engages correctly. Hang it in the
machine where the stainless steel
milk flask normally sits.
L
J
m
n

Clean milk pipework

To prevent milk going off in the
machine and the pipework getting
clogged up, it should be cleaned at the
end of each day using the cleaning
agent supplied.
^ If the milk pipework in the lid is
clogged, use the cleaning brush to
clean it under running water.
Insert the brush in the pipework and
move it back and forth as far as it will
go until all the milk deposits are
C
removed.
H
q r
^ Touch the right arrow sensor to
highlight the maintenance symbol
and touch the OK sensor.
^ Select "Clean milk pipework" and
touch the OK sensor.
^ Select "Start" and touch the OK
sensor.
The display will let you know the current
status of the machine or what action
needs to be taken.
^ Follow the instructions step by step.
Cleaning and care
Maintenance
L
I J
n
C
m
47