Setting Up The Handset For Use - Gigaset E630H User Manual

Getting started

Setting up the handset for use

The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
Caution
Use only rechargeable batteries recommended by Gigaset Communications GmbH
¢
( page 46) , as this could otherwise result in significant health risks and personal injury. For
example, the outer casing of the batteries could be destroyed or the batteries could explode.
The phone could also malfunction or be damaged as a result of using batteries that are not
of the recommended type.
¤
Insert the batteries with the polarity in the
right direction (for correct +/- direction,
see diagram).
¤
Hold the battery cover at a slight angle and insert
the bottom into the casing first
¤
Then press the cover
¤
Insert the locking disc as shown (at an angle of
approx. 20°) 3 . Pay attention to the arrow
markings.
¤
Turn locking disc clockwise to the end stop
The locking disc is closed once the markings on the
disc are aligned with those on the cover
To open the battery cover, for example to change the
batteries:
¤
Turn the locking disc anti-clockwise to the end stop
6
(approx. 20°) and remove
¤
Place your fingernail in the notch on the side
between the cover and the casing
the cover .
9
6
1
.
2 until it clicks into place.
5
7
.
and remove
8
1
4
.
.
7
4
5
6
9
2
3
8