Page - Gigaset E630H User Manual

Belt clip
The handset has notches on each side to attach the belt clip.
u
To attach — press the belt clip onto the back of the handset so that
the tabs on the belt clip click into place in the notches.
u
To remove — press the centre of the belt clip firmly with your right
thumb, push the fingernail of your left thumb up between the clip and
the casing and pull the clip in an upward direction.
Connecting the headset
1
You can connect a headset to the underside of your
telephone with the 2.5 mm jack connector
information on recommended headsets, see the
relevant product page at www.gigaset.com.
Charging the batteries
The batteries are supplied partially charged. Please charge completely before use. (The batteries
are fully charged when the power icon
¤
Charge the handset in the charging cradle for 7.5 hours.
Notes
u
The handset may only be placed in the designated base/charging cradle.
u
The battery may heat up during charging. This is not dangerous.
u
After a time, the charge capacity of the battery will decrease for technical reasons.
1 . For
disappears from the display.)
7.5 h
2
If you do not wish to connect a
headset, please insert the rubber
cover supplied 2 to guarantee the
unit is still splash proof.
Getting started
7