Gigaset E630H User Manual page 24

Adjusting the telephone settings
Setting the display backlight
The display backlight is always lit when the handset is not in the base/charging cradle or when
a key is pressed. Any digit keys pressed appear on the display for pre-dialling.
Ï
You can also activate/deactivate the display backlight for idle status:
v ¤ ¤ ¤ q Display
OK
In Charger: r On / Off
Out of Charger: r On / Off
¤
Save
Note
The handset's standby time can be significantly reduced if the display backlight is activated.
Activating/deactivating visual call
Ï
Incoming calls are signalled visually (e.g. in noisy environments).
v ¤ ¤ ¤ q Telephony
OK
Please note: Changes are only saved permanently in Profile Personal (
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as you remove it from
Ï
the charging cradle.
¤ ¤ ¤
v q Telephony
OK
Regardless of the setting Auto Answer, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold c for a further 2 seconds while placing
the handset in the charging cradle.
Setting earpiece profiles
You can set various profiles for the earpiece to optimally adapt your phone to your environment.
Check which is the most comfortable for you.
Ï
v ¤ ¤ ¤ q Audio Settings
OK
¤
profile Select (Ø = selected)
Earpiece Profiles: High and Low. The default is Low.
22
¤ ¤ q Backlight
OK
¤ ¤ q LED Call Signal
OK
¤ ¤
OK Auto Answer
¤ ¤ q Earpiece Profiles
OK
¤
OK
¤
Change (
¢
page 31).
¤
Change (³ = activated)
¤
OK
³
= activated)
¤ q Select