Advertisement
6.
Connect the thermostat connector.
Remove the blue tape to free
the thermostat connector.
7.
Install the A/C switch button.
With a small flat-tip screwdriver,
carefully pry off the A/C switch
hole cover from the control panel.
8.
Reinstall these parts:
Glove box and connector
Glove box frame
Passenger's knee bolster [torque the mounting bolts to 9.0 N
Dashboard lower cover
Passenger's under-dash fuse/relay box cover
Center console cover
6 of 16
Plug the connector
you just freed into the
thermostat.
Install the colored screen
over the switch.
AII 22912 (0109)
Attach the vehicle harness to
the bracket on the side of
the evaporator.
Install the A/C
button on the switch.
.
m (6 lb-ft)]
2001 American Honda Motor Co., Inc. -- All Rights Reserved
Advertisement
