Advertisement
17. Install the suction hose and the discharge hose (compressor side).
Apply a few drops of refrigerant
oil to the fittings, then connect the
discharge and suction hoses to
the compressor using
two 6 mm flange nuts
(94050-06080). Torque
.
the nuts to 10 N
18. Install the power relays and the condenser fan fuse.
19. Install the condenser mounting bolts, the radiator mounts, and the A/C label.
Attach this label at the
location shown.
14 of 16
m (7 lb-ft).
Remove and discard
this nut and cap.
Plug in the 20 Amp fuse here.
Install the two 6 x 16 mm washer-bolts (93405-06016-04)
for the condenser upper mounts. Torque the bolts to
.
10 N
m (7 lb-ft).
Plug in the two power
relays here.
AII 22912 (0109)
Remove and discard
this nut and cap.
Reinstall the radiator
brackets and mounting
bolts. Torque the
mounting bolts to
.
10 N
m (7 lb-ft).
2001 American Honda Motor Co., Inc. -- All Rights Reserved
Advertisement
