Time Settings; Firmware Upgrade - Luxul XBR-2300 User Manual

5.9.1 Time Settings

This is where the Time, Date and Time Zone are set for the XBR-2300.
Time zone can be manually set by the user or GMT can be automatically obtained
from the Internet. If the automatic GMT option is selected, time can only be set af-
ter the XBR-2300 has access to the Internet. Current time can also be set manually.
Enable Network Time: System time is obtained automatically from the Internet
„
Update Interval: Sets the time Adjusting Period for Daylight Savings
„
Time Zone: Sets the Local Time Zone in which the XBR-2300 resides
„
5.9.2 Backup/Restore
This section allows you to Backup and Restore the XBR-2300 confi guration.
Backup: Click "Backup" to be given a Save Confi guration dialog box
„
Restore: Click "Browse" to select a saved Confi guration fi le on your device
„

5.9.3 Firmware Upgrade

This section allows for the upgrade of the XBR-2300 Firmware. It is recommended
to check regularly for any Firmware updates.
Firmware upgrading steps
1. Browse: To select the path of the Firmware File
2. Upgrade: Performs the upgrade with the selected Firmware File
3. Router automatically reboots after being upgraded
WARNING!: Do not shut down power to the XBR-2300 during the
5.9.4 Policy Upgrade
Policy Upgrade updates the automatic fi lters on the device, creating a more secure
network. It is recommended to run this Upgrade periodically to obtain new defi nitions.
48
upgrade process or the router will be damaged. The XBR-
2300 will automatically restart after a successful upgrade.
The upgrade process may take several minutes to fi nish.
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
User Guide