HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
1. Press the POWER switch to turn on the power.
ON
OFF
POWER
2. Press the INPUT SELECT button to choose input.
B
A
INPUT SELECT
3. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
+
–
VOLUME/SELECT
PICTURE ADJUSTMENT
1. Press select button corresponding to the item you
want to adjust.
PHASE
CHROMA
BRIGHT
2. Adjust with the VOLUME/SELECT buttons.
+
–
VOLUME/SELECT
6
_ON : Power turns ON. (Power indicator: lit)
—OFF : Power turns OFF. (Power indicator: unlit)
Selects video/audio signals input to terminals on the rear
panel.
INPUT
Terminals on the rear panel
SELECT
Video signal input
button
1
VIDEO A terminal
Input A
2
VIDEO B terminal
Input B
Press this button to display the speaker volume level on the
screen.
+ : The Built-in speaker volume is increased. (00 = 50)
– : The Built-in speaker volume is decreased. (50 = 00)
* Screen indication will disappear about 10 seconds after
operating.
The item you select is displayed on the screen.
1
PHASE (
) : Phase control
2
CHROMA (
3
BRIGHT (
) : Brightness control
CONTRAST
4
CONTRAST (
Items
PHASE
(Phase)
CHROMA
(Chroma)
BRIGHT
(Brightness)
CONTRAST
(Contrast)
* Screen indication will disappear about 10 seconds
after operating.
Audio signal input
AUDIO A terminal
AUDIO B terminal
) : Chroma control
) : Contrast control
VOLUME/SELECT button
–
+
reddish
greenish
lighter
deeper
darker
brighter
lower
higher
Colour system indication
(PAL or NTSC)
PAL
With regard to Colour system indication
● With the COLOR SYSTEM setting
set to AUTO mode, when you turn on
the power or select inputs, the colour
system indication appears for about 3
seconds on the screen while PAL or
NTSC signals are being detected.
It does not appear when receiving
B/W signal or when no signal is input.
See page 7 for COLOR SYSTEM
setting.
00 ~ 50
VOLUME
:
20
–
–20 ~ +20
PHASE
:
00
–
Notes:
● Phase control is effective only in the
NTSC colour system mode.
● Chroma control is not effective when
receiving B/W or when no signal is
input.
● When the Chroma control is set
to level "–20", the picture turns
monochrome.
● "NO EFFECT" is displayed (For
about 3 seconds) when your selected
function has no effect.
+
+