JVC Colour Video Monitor TM-A140E Instructions Manual page 9

Set-up menu items
H. POSITION
WHITE BALANCE
DRIVE R.DRIVE
B.DRIVE
CUT OFF R. CUT OFF
G. CUT OFF
B. CUT OFF
CONTROL LOCK
4. To set the other set-up menu items, repeat the
procedures 2 and 3.
5. Press the MENU button to quit.
MENU
Purpose
Adjusts the horizontal position of the
screen (+ : Horizontal position shifts
to the right/–: Horizontal position
shifts to the left).
Adjusts the white balance.
Adjusts red level.
Adjusts blue level.
Adjusts red cut off.
Adjusts green cut off.
Adjusts blue cut off.
Sets the operation buttons on the
front panel to control lock mode.
Front panel Function
button displayed
MENU EXIT
–05 –04 • • –01
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.
Screen setting is changed to the selected setting mode.
Select R/G/B buttons corresponding to the function display
to adjust.
–09 –08 • • • • • •
–09 –08 • • • • • •
–09 –08 • • • • • •
–09 –08 • • • • • •
–09 –08 • • • • • •
OFF ON
Contents
Quit (or Release) the
<MENU> screen.
Settings
00 +01 • • +04 +05
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
–01 00 +01 • • • • • • +08
Notes:
● When the CONTROL LOCK function
is set to ON, pressing operation
buttons on the front panel will display
the message "CONTROL LOCK ON!"
on the screen for about 3 seconds.
● The CONTROL LOCK function is
maintained even when the power is
turned off.
● To turn off the CONTROL LOCK
function, while holding the MENU
button press the PHASE button. Then
set the CONTROL LOCK function to
OFF.
● Even when the CONTROL LOCK
function is set to ON, the following
operations are available:
– Power Switch operation.
– Sound volume adjustment with the
VOLUME/SELECT buttons.
– Display or disappear of the
<SET-UP MENU> screen.
+09
+09
+09
+09
+09
9