Understanding The Ddm3521 Back Panel - Ubee DDM3521 User Manual

Ubee Interactive
1.6

Understanding the DDM3521 Back Panel

All ports to connect the device are located on the back panel. The following image and
table describe the device's back panel connections.
Back Panel Label
PWR
ETHERNET
RESET
CABLE
Ubee DDM3521 Cable Modem User Guide • February 2013
Connects to the power adapter. WARNING: Use only the power
adapter shipped with this device. Failure to do so may cause
damage to the device.
Connects an Ethernet device such as a computer, gaming console, or a
router/hub to the Internet using a standard RJ45 Ethernet cable. See the
Understanding the Customer Premises Network on page 4
information.
Resets the device. Insert a pointed object into the opening. Press for less
than10 seconds to power cycle the device. Press for more than 10 seconds
to reset the device to the factory defaults.
Connects to the coaxial cable (not included) that comes from the cable wall
outlet or cable splitter (not included).
Description
Introduction
for more
7