Advertisement
FERM COMBI SANDER FCS-180
USERS MANUAL
TECHNICAL SPECIFICATIONS
Voltage
| 230 V~
Frequency
| 50 Hz
Power consumption
| 240 W
No load speed
| 6000-8500/min
Weight
| 1.62 kg
Lpa (noise burden)
| 77.4 dB(A)
Lwa (noise capacity)
| 90.4 dB(A)
Vibration value
| 3.69 m/s2
CONTENTS OF THE PACKAGING
1 Sander
1 Triangular sanding foot
1 Rotating sanding foot
2 Detail sanding feet
1 Scraper
1 Adapter
1 Allenkey
3 Pieces of sandpaper for the triangular sanding foot
3 Pieces of sandpaper for the rotating sanding foot
2 Pieces of sandpaper for the detail sanding feet
1 Case
1 Instructions
1 Safety section
1 Warranty card
Check the machine and accessories for transport
damage.
PRODUCTINFORMATION
The Ferm FCS-180 Combisander is a versatile machine
with which you can easily sand large surfaces, corners
and even round or small parts. The Combisander can be
used to sand wooden and metal surfaces.
In addition the machine is delivered with a scraper which
can be used to easily remove loose paint layers and
remains of glue from the area to be sanded.
2
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Ferm products are manufactured to high quality stan-
dards they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in saf-
ety. Remember to consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear suitable gloves and
apron to protect against sparks/debris. Wear earplugs
or ear defenders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
EXPLODED VIEW
Ferm
Ferm
11
Advertisement
