Dedicated Micros Digital Sprite 2 Manual page 89

5. Enter the prefix information that will precede the image file when uploaded to the FTP Server,
an example is 'cam_' which would create a file name of cam_01.jpg.
6. Enter the username and password to allow the files to be uploaded to the FTP Server, this
will be given to you by the Network Administrator.
7. Enter the update interval in seconds, this identifies the time between updated files being
transmitted from the Digital Sprite 2 to the FTP Server. The speed and cost of the network
connection being used should be taken into account when setting this time period.
8. Enable the video input(s) that are to be made available for webcam functionality. Images
from these inputs will be transmitted to the FTP Server for integration into web pages.
9. Save the configuration information by selecting Save Settings!
Note: For configuration via the OSD refer to Appendix G where all menu options are
described.
Function
FTP Server
FTP Root
Drive/Directory
FTP Image Directory
Image Filename Prefix
Dedicated Micros
Description
This is the IP address, URL or Domain Name of the FTP Server.
Images will be uploaded from the Digital Sprite 2 to this FTP server
as time intervals specified.
This is the main/root directory on the FTP server where the image
directory will be located.
This directory will be created when the initial image is uploaded to
the FTP Server, it is the directory where all images will be saved on
the server.
This is an identifier for images sent from this Digital Sprite 2 and will
be stored as a prefix to the file name.
Page 87