Dedicated Micros Digital Sprite 2 Manual page 71

8. It is possible to identify where the e-mail has be sent from, this is optional if this are is left
empty the video server will use the system name & DNS name to create a sender name.
Note: The Digital Sprite 2 can not receive e-mail replies but this must be a valid e-
mail address for an SMTP Server.
9. The Digital Sprite 2 can be forced to send an e-mail under numerous conditions; start up of
the Digital Sprite 2, on alarm (this must also be enabled in Alarm Zone page), camera failure
and VMD activation (this must also be enabled in the Alarms/VMD page). Place a tick against
the actions that are applicable to your systems functional requirements.
10. Place a tick in the e-mail log box to ensure ever e-mail transaction is added to the system
logs.
11. Save your configuration by selecting Save Settings!
Note: For configuration via the OSD refer to Appendix G where all menu options are
described.
Function
Connection Profile
Mail Server
Recipient
Dedicated Micros
Description
It is possible for the e-mail to be transmitted via the Ethernet network or
dial up connection. This setting presumes that a modem has been
connected or configured and the Digital Sprite 2 is connected to a LAN
or WAN and allocated a valid IP address.
This is the IP address or DNS name of the SMTP Server that the e-mail
from the Digital Sprite 2 will be sent to. The SMTP server will then
forward this onto the recipient.
Note: You must ensure the DNS Server address in the Network Settings
is correctly configured to be able to use DNS instead of the IP address.
This is the e-mail address and display name of the intended recipient of
the e-mailed image.
Page 69