Table of Contents
Advertisement
6.3 Wiring
The figure below shows where to connect cables on the rear of the display unit.
ANTENNA UNIT
NX-3H-D
NAVTEX RECEIVER
ANT
10 m
2 m
POWER
Ground
(12-24 VDC)
1 A FUSE (+ Line)
-
+
Black
Red
To personal computer
To navigational equipment
Figure 6-3 Wiring
Note: The fuse holder contains a spring that fixes the fuse. To prevent detachment of the spring,
which would cause loss of power, tie the line as shown in Figure 6-4.
Fuse holder
+ line (red)
Tie here.
Figure 6-4 How to fix spring in fuse holder
6-3
www.Busse-Yachtshop.de
email: info@busse-yachtshop.de
Advertisement
Table of Contents
